fatty
VE
- Joined
- Mar 23, 2009
- Messages
- 959
I pulled my engine recently to reseal it and do a cam. Everything looked fine until I got the oil pan off and found what appear to be two of the piston squirters laying next to the drain plug. Black plastic hollow pieces about 1.25-1.5" long, maybe 3/16" diameter. I'd post a pic but I'm on my phone. If someone can pm me their number I'll send the pic to be posted.
Question is, do I need to replace them? Engine ran great when pulled, still has cross hatch on all the walls. The bottom of the pistons and rods still look good.
If they do need replaced can I just pull the crank and replace everything exactly how it was? Or would I need new bearings?
Wasn't expecting to get this involved so that's why I got so many questions. :doh:
Question is, do I need to replace them? Engine ran great when pulled, still has cross hatch on all the walls. The bottom of the pistons and rods still look good.
If they do need replaced can I just pull the crank and replace everything exactly how it was? Or would I need new bearings?
Wasn't expecting to get this involved so that's why I got so many questions. :doh: