AH64ID
New member
- Joined
- Dec 31, 2008
- Messages
- 883
I am selling my stock injectors from my 2005.
They have 93,885 miles on them, and have always been treated with triple fuel filtration down to 3um and fuel lubricity additive. Stock rail pressure only.
They were tested on a Bosch machine and came back good. The only minor thing is a little high (less than 1.0 mm3 above max) on the minimum flow (100 MPa, 160us) , but at all other test points they are within spec and very similar. The return flow on all the test points are very good and well within spec.
They ran perfect in my truck, clean burning, no stutters, white smoke on cold starts, or anything that raised an eyebrow.
They would still be in my truck if I wasn't changing my pistons to the 03-04 design.
$1000 to your door.
They have 93,885 miles on them, and have always been treated with triple fuel filtration down to 3um and fuel lubricity additive. Stock rail pressure only.
They were tested on a Bosch machine and came back good. The only minor thing is a little high (less than 1.0 mm3 above max) on the minimum flow (100 MPa, 160us) , but at all other test points they are within spec and very similar. The return flow on all the test points are very good and well within spec.
They ran perfect in my truck, clean burning, no stutters, white smoke on cold starts, or anything that raised an eyebrow.
They would still be in my truck if I wasn't changing my pistons to the 03-04 design.
$1000 to your door.