cmont58
Yankee
- Joined
- Apr 27, 2010
- Messages
- 1,071
So I'm having a major fueling problem. I'm only building a max of like 8000 psi once warmed up but 15000 when cold and 15000 after I run it for a couple hours. Swapped fca's with a buddies good one and my AD is running at 18 psi at idle. Throwing a po148 and a fan clutch code. Is there anything I should check before I throw a cp3 at it or can the fan clutch throw the fueling off that bad? Thanks in advance.