Fummins 47re swap, which trans controller to use? PCS or Anteater

L

LCexplorer

New member
Joined
Aug 10, 2009
Messages
17
Well I am about to swap a Cummins 12v into 2004 F350 and decided to go with a 47re since I have a built one sitting on the shelf and don't plan to go much beyond 300hp. I have done lots of reading about the swap and pretty much answered all my questions with the exception of the 47re controller.

I have considered an Anteater 47re controller but I thought I would ask about using a PCS TCM2000 since I have one already. Does anyone use a PCS TCM2000 controller on a stock 47re (without the pricey additional valve body like the ATS system). I am pretty sure I could build a harness for it or ask PCS really nicely to build me one. Can a TCM2000 run a 47re effectively or would I be better off buying an anteater controller for my 47re? Thanks.
 
If it helps I will be swapping a Cummins 12v Ve pump into a 2004 F350 with a 5.4L coming out (w/ 4r100 attached).
 
Can't say I've ran the pcs stuff, but I love my anteater. I've been running one for over 4 years now I believe
 
Anothet AntEater vote, Ive had 2 now in diferent trucks, couldn't be any easier.

These were both the early gen ones, I'm sure they're even better and more advanced now.
 
thatguy69 said:
Can't say I've ran the pcs stuff, but I love my anteater. I've been running one for over 4 years now I believe
Click to expand...

I've never run PCS stuff, but I've heard more complaints than good... Can't say the same for the Anteater.
 
You must log in or register to reply here.
Back
Top