jpowel29
New member
- Joined
- Mar 19, 2009
- Messages
- 694
Garrett GT4202 Journal Bearing Turbo - fresh rebuild (zero miles on it since)
Compressor Specs:
74.3mm inducer (cast Garrett wheel)
102mm exducer (53 trim)
5" compressor
3" vband oulet
Based on Garrett's map it flows around 95lbs/min
Turbine Specs:
82mm Garrett turbine (84 trim)
4" vband outlet
T4 Garrett housing 1.15 A/R
Based on Garrett's map it flows around 42lbs/min
Great all around turbo. I ran one identical to this back in 2009 as a single on my reg cab LBZ and made 741hp to the tire on a stock longblock with 60% over nozzles. The truck ran 11.55 @ 115mph with a Gt4202 as a 2wd.
These also twin nicely with the stock VGT for a fun and hassle free street/towing twin. This is a spare turbo. I sent it in for a refresh and balance. It is ready to bolt on and go.
$1000
Compressor Specs:
74.3mm inducer (cast Garrett wheel)
102mm exducer (53 trim)
5" compressor
3" vband oulet
Based on Garrett's map it flows around 95lbs/min
Turbine Specs:
82mm Garrett turbine (84 trim)
4" vband outlet
T4 Garrett housing 1.15 A/R
Based on Garrett's map it flows around 42lbs/min
Great all around turbo. I ran one identical to this back in 2009 as a single on my reg cab LBZ and made 741hp to the tire on a stock longblock with 60% over nozzles. The truck ran 11.55 @ 115mph with a Gt4202 as a 2wd.
These also twin nicely with the stock VGT for a fun and hassle free street/towing twin. This is a spare turbo. I sent it in for a refresh and balance. It is ready to bolt on and go.
$1000