Gta5523

PhillipF

PhillipF

New member
Joined
Apr 7, 2015
Messages
120
Gta5523, has a 84/123 compressor, 111/102 turbine in a 1.24 t6 housing. Compressor cover is powder coated gloss back and has a 6in inlet and a s400 v-band outlet. Can be upgraded to a billet 89mm at FI for $400 as it is a snub shaft turbo. I made 1100 with this and a 75 on a stock motor 5.9, I believe it is capable of making 1200. $1350 shipped
image_zpsdvg6uwfy.jpeg
image_zpsityun6v1.jpeg
 
Last edited:
Yes it is open, it spooled relatively well for its size, was making full boost at around 2500rpm if not limited (75/96) on the manifold. Also made about 5psi cruising at 80 when overall was only 10-12.
 
I'm curious how this would pair with a 66 on a 12v (competition use only).
 
I believe I've seen on one a 12v with a 63 it ran pretty well, can't recall any numbers though, it will defiantly like higher rpms, I also have a 1.12 housing I can send it with instead that has a chrome like ceramic coating, I'll leave it up the the buyer if they want the 1.12 or 1.24 both are t6 open, I just need to keep one of them.
 
Any chance you have an exhaust housing you could sell?
 
I do not, I have a 1.24 and 1.12 but one of them needs to be on this turbo for sale and I'm keeping the other one for my other turbo.
 
Any chance you need a spare that's missing the exhaust housing? Lol
 
Only if it's a 106mm lol. I have a 94mm sitting here that's the only reason I'm selling this one.
 
Someone make me an offer on this thing, anything reasonable will most likely be accepted.
 
The 1.24 housing option will be gone here in a week or less. Putting my stuff together.
 
You must log in or register to reply here.
Back
Top