R rcfreak24 New member Joined Feb 6, 2010 Messages 753 Sep 15, 2014 #1 241 dhd transfer case from auto. 550$ A1 h11 24v head studs used once 475 shipped Complete 24v engine taken apart, was going to build and never did. Includes ecm, wiring, and vp44, 950$
241 dhd transfer case from auto. 550$ A1 h11 24v head studs used once 475 shipped Complete 24v engine taken apart, was going to build and never did. Includes ecm, wiring, and vp44, 950$
shortbusdriver this guy Joined May 17, 2009 Messages 2,318 Sep 15, 2014 #2 Location? Interested in the 24v engine if the crank doesn't need to be turned.
R rcfreak24 New member Joined Feb 6, 2010 Messages 753 Sep 15, 2014 #3 Kentucky. Crank does not need turned. Block will need honed but is standard still ran perfect. Going to Nebraska next weekend if that helps. I have a 5.9 common rail crank also good
Kentucky. Crank does not need turned. Block will need honed but is standard still ran perfect. Going to Nebraska next weekend if that helps. I have a 5.9 common rail crank also good
shortbusdriver this guy Joined May 17, 2009 Messages 2,318 Sep 15, 2014 #4 Too far away for this guy. Thanks.
Aaron Loy New member Joined Sep 4, 2011 Messages 154 Sep 16, 2014 #5 What part of Kentucky? May be interested in the motor
Aaron Loy New member Joined Sep 4, 2011 Messages 154 Sep 17, 2014 #7 No problem. Let me know if it falls through.
Lodge125 New member Joined Feb 18, 2012 Messages 151 Sep 17, 2014 #8 Where at in Nebraska? Might be interested in the motor
R rcfreak24 New member Joined Feb 6, 2010 Messages 753 Sep 17, 2014 #9 near Omaha. engine might be spoken for/traded
Lodge125 New member Joined Feb 18, 2012 Messages 151 Sep 18, 2014 #10 Well let me know if it falls through!