RATTLE N HUM
New member
- Joined
- Sep 16, 2007
- Messages
- 341
216-232-107 steel cam and stock lifters $700 has about 4 hours run time on it 3.5 of that is probably idle and break in time on the dyno
This cam works well with engines that operate in the 3,500-5200rpm range with really good flowing heads.
You will need aftermarket springs, pushrods, cam bushings and .200" valve reliefs.
This cam works well with engines that operate in the 3,500-5200rpm range with really good flowing heads.
You will need aftermarket springs, pushrods, cam bushings and .200" valve reliefs.
