He351cw turbine blades bent/unusable?

[SCHMITTY]

I traded an old n20 kit from my gasser for a used 351cw off an 06' that lost number 6 cylinder( melted it ). The turbo had little shaft play and looked good 110,000 miles. I was tearing it down tonight so I could drill out the waste gate and polish the compressor housing and I noticed the turbine ades looked a little mangled. What do you guys recommend to make this useable? I have an overhaul kit that came with the charger. This thing is going on my 12 valve- hopefully.

 

[Lostnwalmart]

A new turbine wheel...

 

[SCHMITTY]

Here is another one

 

[Lostnwalmart]

That is damage from piston debri /heat

 

[SCHMITTY]

Do you know of a good place to order a replacment? I did a quick google search and came up with bae turbos. Does 139.00 sound right for a shaft /wheel? I almost would have been money ahead with a larger after market turbo.

 

[WUnderwood]

Did the overhaul kit not come with a turbine wheel?

 

[SCHMITTY]

Just bearings,washers,seals, o rings.

 

[WUnderwood]

I would stay away from anything BAE

 

[SCHMITTY]

I found 1 on eBay- 78.99. So is it the compressor wheels that are interchangeable between the hx40/351cw/351vgt? But not turbine wheels? I also take it that turbine wheels/shafts are always one piece?