help on injectors

H

heins

New member
Joined
Nov 8, 2011
Messages
131
doing p pump conversion to my 99 dodge this year.. ive did alot a research on injectors and im still clueless :nail: i have narrowed it down to either 6x16's or 7x14's.. I think a 7 hole injector would atomize better than a 6 hole just by the way people talk about the way 6 hole injectors smoke.. Im really dont care about smoke i just want to put down some big horsepower and torque numbers with this thing.. what do u all think?
 
7 x .014's are pretty good sized injectors. Might want to give a bit more info about your setup(turbo size, timing, pump,etc). Everything sort of works together.
 
alright.. i got and 64/71/13 over a s480 1.32 a/r..the p pump is a dual fed 12mm benched to 600cc's (alittle overkill) and got a ported and polished head with the intake pleum cut off of it.. far as timing i was thinkin maybe 25-26? it going to be a weekend truck so im not too worried about drivabiliy..haha
 
Lightening 2s make good power in a couple of friends trucks with less
 
they are schied injector, im thinking around 6x.012 or so if i remember correctly. both adam winslett and chad lajun both are making 75o or so on the motor and chad made 930 or so with some giggle gas and adam makes right around the 1k with these..
chads is a 215 pump, and of course adams is the vp...
 
You must log in or register to reply here.
Back
Top