Help with triple turbos!!

[NELSON359]

I have been thinking of putting an 88 with my 66, but i already have a t3 62mm turbo sitting around i was thinking about just buying another one of them and building my own triple kit. I was planing on pulling the head this winter and haven it o-ring and some port work and cam, I am just wanting to get away from nitrous and have a bad a** street truck on fuel. the truck and all of the mods are in my sig.

 

[JQmile]

Twin 62's should flow a little more than an S480, so it'll be a good amount of air. Let me know if you need another 62

 

[NELSON359]

Twin 62's should flow a little more than an S480, so it'll be a good amount of air. Let me know if you need another 62

i might be given you a call! what specs would you recomend?

 

[NELSON359]

any ideas?

 

[smokin247]

I'd be curious of exhaust sizing also since your splitting your exhaust flow. I've been planning a triple set with 63s.

 

[12VALVEADAM]

The race truck we are doing this winter is getting a set of 64's or tight 66's. our tow rig fummins has a 62 and 2 351's which is crazy fast spool even higher up here.

 

[NELSON359]

Might be on a delay until winter, I am tryin to get all the OT I can right now so I can start building my house in the spring. I am wanting to pull the head have some port work and o-ring it and do a cam also. I'm thinking winter I will have time to let it sit while I built the turbo kit and pull the head!