PRINCETON_JAKE
New member
Is there a link to all the specs and sizes for a HX40? (inducer and exhaust diameter, and housing sizes) Also what is a Super HX40?
all i can see on the super-40 is a higher boost capacity and wider map width an high speed balanced roter system an 130,000rpm max rotor speed. ill work on getting inducer size an xducer size when i get a call back the part no# is 4027888Is there a link to all the specs and sizes for a HX40? (inducer and exhaust diameter, and housing sizes) Also what is a Super HX40?
Dont chop the throttle. 40's dont like that.
the 60mm inducer HX40 is the biggest inducer offered, and considered to be the best HX40 available so I bet a "super" HX40 is just a stock 60mm inducer.
The Super40 does have a "stock" 60mm comp wheel but what makes it a Super40 is the turbine side. Holset manufactures a special high flow turbine wheel that they put only in the Super40. No other HX40 uses this turbine wheel, no other than a 60mm compressor wheel is available in a Super40, all Super40s come with a 16cm w/g housing. The 60mm comp wheel is the biggest comp wheel that Holset makes for the HX40.
the super 60 i have sitting in the shop is a 60/60/16 and has a 7 blade compressor wheel. comparing to my 62/65/12....well there is no comparason the super 40 is as laggy as hx55. and the 62 lights like a stocker
My hx40 with an 16cm exhaust housing spooled ridiculously fast... That's with a HRVP, 60hp injectors and whatever wiretap box you choose, I tried em all, lol. I always wonder why some people claim HX40s are laggy... They need more fuel I guess, lol.
I wish i was that lucky. And fuel, i got the fuel. Its the air i need. I have a HRVP, 7 x.018s, 4500 rpm redline box, fass150, and i can not get it to spool on the track. It works great on the street but not pulling a sled.