Big Blue24
Comp Diesel Sponsor
- Joined
- Jan 5, 2008
- Messages
- 6,310
Recently I've been playing with a 62mm compressor wheel and cover made by BAE turbo for the HX35. The compressor wheel measures 62mm x 86mm and features 7 blades, just like a regular Super 40 or He351 compressor only 2mm larger on the inducer.
I also drilled across the divider and opened up the wastegate passage a few mm's but otherwise, stock hot side.
The test mule is a 1997 Dodge Ram 2500 Automatic with a few hundred thousand miles on the otherwise stock motor.
5x.012" VCO 155* injectors
0.025" Delivery Valves
22* Injection Timing
Wastegated to 39 psi
461 HP Fuel Only
[ame="http://www.youtube.com/watch?v=vmojn-MpV6M"]http://www.youtube.com/watch?v=vmojn-MpV6M[/ame]
We then hit it with identical setup only adding a 75hp shot of nitrous.
Boost hit 45 psi with the same wastegate setting.
568 HP on N2O
[ame="http://www.youtube.com/watch?v=iPdTRq2EWHc"]http://www.youtube.com/watch?v=iPdTRq2EWHc[/ame]
I also drilled across the divider and opened up the wastegate passage a few mm's but otherwise, stock hot side.
The test mule is a 1997 Dodge Ram 2500 Automatic with a few hundred thousand miles on the otherwise stock motor.
5x.012" VCO 155* injectors
0.025" Delivery Valves
22* Injection Timing
Wastegated to 39 psi
461 HP Fuel Only
[ame="http://www.youtube.com/watch?v=vmojn-MpV6M"]http://www.youtube.com/watch?v=vmojn-MpV6M[/ame]
We then hit it with identical setup only adding a 75hp shot of nitrous.
Boost hit 45 psi with the same wastegate setting.
568 HP on N2O
[ame="http://www.youtube.com/watch?v=iPdTRq2EWHc"]http://www.youtube.com/watch?v=iPdTRq2EWHc[/ame]