cumminsman315
New member
- Joined
- May 22, 2009
- Messages
- 987
2-24v timing gear cases (also have a new gasket)
2-front covers, one off a 12v and other 24v
1-12v timing pin, and the housing for the pin
2-rear main housings
1-bellhousing off a 24v
1-24v flexplate
2-stock 24v cams, very good shape, can send with gear on or off
1-stock 12v cam, good shape besides broke past #5 would work good for a 4bt
2-VP44 gears
1-power steering/vaccum pump, came off a 12v
1-factory harmonic balancer, good shape
1- fan mounting set (everything but the fan blades)
1-factory 12v lift pump
1- set of stock VP44 injection lines, all clamps still installed
1-factory 24v fuel bowl/filter setup
1-12v tappet cover
1-24v tappet cover
1-battery cable the runs to the starter
1-12v bock heater and battery cable
1-12/24v oil pickup tube
2-oil filter housing/oil cooler setups
1-factory 12v A/C pump with lines
1-24v crank-does not have tone ring, has 140k miles and spun #1 & 6 rod bearings, needs to be turned...currently factory spec
1-set of 6, stock 24v pistons with wrist pins, in good shape
1-set of 24v rods, 2 of the 6 previously spun bearings-would need to fix the bearing surface
2 sets of stock 24v tappets, good shape
1-set stock 24v valve springs
1- set of main caps & bolts, out of a 24v
I also have about any bolt from a 12v or 24v motor and some random little parts
Everything listed is used, I know mileage on some of the parts
All prices are best offer, you pay shipping
I will take pictures upon request, can text or post them here
Call/text me at 573-569-5675
Located in central Missouri
2-front covers, one off a 12v and other 24v
1-12v timing pin, and the housing for the pin
2-rear main housings
1-bellhousing off a 24v
1-24v flexplate
2-stock 24v cams, very good shape, can send with gear on or off
1-stock 12v cam, good shape besides broke past #5 would work good for a 4bt
2-VP44 gears
1-power steering/vaccum pump, came off a 12v
1-factory harmonic balancer, good shape
1- fan mounting set (everything but the fan blades)
1-factory 12v lift pump
1- set of stock VP44 injection lines, all clamps still installed
1-factory 24v fuel bowl/filter setup
1-12v tappet cover
1-24v tappet cover
1-battery cable the runs to the starter
1-12v bock heater and battery cable
1-12/24v oil pickup tube
2-oil filter housing/oil cooler setups
1-factory 12v A/C pump with lines
1-24v crank-does not have tone ring, has 140k miles and spun #1 & 6 rod bearings, needs to be turned...currently factory spec
1-set of 6, stock 24v pistons with wrist pins, in good shape
1-set of 24v rods, 2 of the 6 previously spun bearings-would need to fix the bearing surface
2 sets of stock 24v tappets, good shape
1-set stock 24v valve springs
1- set of main caps & bolts, out of a 24v
I also have about any bolt from a 12v or 24v motor and some random little parts
Everything listed is used, I know mileage on some of the parts
All prices are best offer, you pay shipping
I will take pictures upon request, can text or post them here
Call/text me at 573-569-5675
Located in central Missouri
Last edited: