Loose boot clamps

[CR From Hell]

This may be a stupid question, so forgive me if so, but my boot clamps like to loosen up after 2 or 3 passes down the track, and won't build over 7PSI off the line with an S475. Obviously an easy fix, but it just gets annoying if they feel like doing it while I'm trying to launch. They are brand new heavy duty spring clamps & boots, and I wouldn't think they'd have a hard time handling 50 PSI, but here I am.

I was thinking loctite or swapping the nuts on the clamps for locking nuts, but I wanted to hear if anyone else has this problem and what you did to fix it? Thanks!

 

[spooled05]

Since ive started using mikalor constant tension clamps ive not had any problems with boots , i only have the i/c connections left as everything else is vband. 80 psi plus

 

[CR From Hell]

Since ive started using mikalor constant tension clamps ive not had any problems with boots , i only have the i/c connections left as everything else is vband. 80 psi plus

I've heard of these before, are you going straight through Mikalor or a dealer?

 

[spooled05]

Fastenal

 

[CR From Hell]

Good stuff I gotta go there this week anyhow for some studs, thanks brother!