joelc79
New member
- Joined
- Oct 28, 2008
- Messages
- 3,075
I want to go with some Rancho 9000XL on my 03' and i am having a hard time coming up with a part #. The truck is lowered maybe 4"-5" in the rear. I would assume i would want a different shock in the rear than stock. I tried calling Rancho direct and the sales rep doesnt have fancy cross referencing software to get me different length shocks with the same eyelet dimentions.
The front i figure i can go with stock because its only maybe 2"-3" lower with the 1/2 ton gasser springs.
The front is stock, PN. is a RS999221 23.25" extended X 15.00" collapsed.
The rear dimentions i want (roughly) are 23.87" ext. X 14.87" with a 9/16th eyelet.
So for those of you who has lowered a 3rd gen 4X4 what shocks (part number) do you run?
Thanks!
The front i figure i can go with stock because its only maybe 2"-3" lower with the 1/2 ton gasser springs.
The front is stock, PN. is a RS999221 23.25" extended X 15.00" collapsed.
The rear dimentions i want (roughly) are 23.87" ext. X 14.87" with a 9/16th eyelet.
So for those of you who has lowered a 3rd gen 4X4 what shocks (part number) do you run?
Thanks!