lowered problem

[jeff115]

I lowered my 4wd the other day, and now it has like mini death woble :doh: why

 

[madmikeismad]

Check track bar?

Maybe it doesn't like the new angle lol

 

[mathews8pt]

I lowered my 4wd the other day, and now it has like mini death woble :doh: why

How much did you lower it?

 

[Hurley]

caster out of spec? what's the link geometry looking like? did you get it aligned after?

 

[lowdiesel]

It's the track bar probably as well as 4 link geometry get it to alignment shop
I had same issue

 

[jeff115]

I didn't measure how low it went. About 3 inches, the control arms arealmoat perfectly level. Trac bar is in good shape.
I'll get it to a alignment shop and see if that helps.

 

[1lowdiesel]

Might want to run a stiffer shock now as well.

 

[jeff115]

Why is that

 

[mathews8pt]

Why is that

My guess would be so you dont hit the bump stops as easily.

Did you use 1500 springs or modify your stock springs?

 

[1lowdiesel]

Just saying that it could be that if you still have the stock shock in there it is bottomed out and the valving maybe shot. Which could cause some adverse effects. Just thinking out loud.

 

[jeff115]

That makes sense.
I cut the stock springs 1 1/2 coils

 

[JoshH]

caster out of spec? what's the link geometry looking like? did you get it aligned after?

This is what I would check first.