Makeshift pull/drag/daily truck AKA (IN2DEEP)

[Foxrider12390]

Well ive been planning this build for quite some time now and its finally begun. This truck is currently my daily driver. Im getting into truck pulling after 3 years of messing around at fairs. I also want to see some decent times at the track and keep this truck somewhat streetable. My build started out with a full billet tranny build and a goal of 600hp. After hours of research I decided 600 just wasn't enough and why spend the money just to replace everything in an attempt to make more power. My new goal is 800 on fuel.
Turbo:Engineered diesel 2.5
Injectors:f1 diesel apex 7
Tranny:Full billet
Fuel:Ats dual cp3 with an airdog 165
Nitrous:200 shot in the near future
Misc:Turbo smart blow off valve, Arp 2000, hamiliton springs

In the past couple days I have pulled my injectors, installed my studs and torqued to 150lbs, springs are in, stainless diesel 2nd gen manifold, and my turbo is now mounted. Im hoping to get this thing all done within the next few weeks to catch the last few days at the track. Anyways heres a few pictures to keep your attention!
[ame="http://s92.photobucket.com/user/foxrider12390/media/C67ACF84-2C78-4CE8-8644-113E65E65BBC.jpg.html"]C67ACF84-2C78-4CE8-8644-113E65E65BBC.jpg Photo by foxrider12390 | Photobucket[/ame]
[ame="http://s92.photobucket.com/user/foxrider12390/media/EEA36341-C65F-4ED6-8971-A0AB824723B3.jpg.html"]EEA36341-C65F-4ED6-8971-A0AB824723B3.jpg Photo by foxrider12390 | Photobucket[/ame]
[ame="http://s92.photobucket.com/user/foxrider12390/media/D7B1F898-3F14-4E39-AB0F-83401F7398DC.jpg.html"]D7B1F898-3F14-4E39-AB0F-83401F7398DC.jpg Photo by foxrider12390 | Photobucket[/ame]
[ame="http://s92.photobucket.com/user/foxrider12390/media/3B787067-3D92-46AE-9DB5-6F50DA757581.jpg.html"]3B787067-3D92-46AE-9DB5-6F50DA757581.jpg Photo by foxrider12390 | Photobucket[/ame]
[ame="http://s92.photobucket.com/user/foxrider12390/media/31176F5B-CD32-444A-AEC1-5598DA38C7B5.jpg.html"]31176F5B-CD32-444A-AEC1-5598DA38C7B5.jpg Photo by foxrider12390 | Photobucket[/ame]

 

[Limited]

You can spray where you pull? Not sure 800 is doable on a 2.5 without it.

 

[DirtyMaxx03]

It is

 

[Foxrider12390]

You can spray where you pull? Not sure 800 is doable on a 2.5 without it.

No I will not be spraying while I pull. That will be for the track only. From what I have read and heard. 800 on fuel only shouldn't be too much of an issue with the right tuning.