Str8jacket
New member
- Joined
- Aug 24, 2013
- Messages
- 66
G'day, after a little advice on how to get the most HP as possible at 1700rpm max on a 8.3, has a PES6A inline fuel pump, currently rated at 234HP @ 2200 rpm. We are building a test bench for a hydraulic pump that we are refining some controls for, the pump needs to be at 1700rpm max, we can creep up to 1800rpm but that requires a lot more on the hyd side of things, pressurised hyd tank etc, possible chare pump which would then rob hp too.
We will need a max of 60 to 100 hrs of testing, rpms will be constant between max 1700 down to 1500rpm between load cycles, a fair bit of steady state rpms limited load. Any suggestions, we have the standard turbo a smaller t3 framed turbo as well as a k29 and a k31, we are not interested in its life span after testing or looks, It will be mounted in a shipping container so it can get pretty buck wild piping wise if needed.
Thanks Str8
We will need a max of 60 to 100 hrs of testing, rpms will be constant between max 1700 down to 1500rpm between load cycles, a fair bit of steady state rpms limited load. Any suggestions, we have the standard turbo a smaller t3 framed turbo as well as a k29 and a k31, we are not interested in its life span after testing or looks, It will be mounted in a shipping container so it can get pretty buck wild piping wise if needed.
Thanks Str8