Mystery part/tool - transmission

SCHMITTY

SCHMITTY

Not enough time
Joined
Jun 20, 2012
Messages
1,188
I'm doing a rebuild for a guy and he brought his 1st gen overdrive tranny to me in a couple boxes. He took it to the local shop and then brought it to me. I'm thinking they may have left a tool in the box wth the parts. This will be my 12th build and I've never seen one of these before
 

Attachments

  • IMG_7752.jpg
    IMG_7752.jpg
    228.7 KB · Views: 0
The camera on my phone is pretty scratched up. Here is another pic
 

Attachments

  • IMG_7751.jpg
    IMG_7751.jpg
    181.4 KB · Views: 0
It's splined all the way through, has a circlip in the middle. The splines match the shafts in the tranny.
 
Is it a 4x4 truck if so looks to be the coupler for between trans and transfer
 
This is the 1st time I've done a 1st gen trans. So the tcase input shaft is male ?
 
It's the splined coupler for between an NP205 and a 518 4WD.
Nice score, those routinely sell for over $150 these days.

Mark.
 
It belongs to the owner of the trans lol. All I got was a basket case of a transmission dropped off. I organized all the parts, checked missing pieces etc. I ended up short 3 pump/gear cover bolts and the coupler.

Now I know - thanks guys
 
You must log in or register to reply here.
Back
Top