New 7 blade drop in wheel now available

[DRTurbo]

For you guys PM'ing us that wanted a new 7 blade HO drop in wheel we now have one for you. The new compressor wheel has a 20% smaller hub, the blades are also staggered on the hub for greater surface area as well and the primary blade to secondary blade angle (13 degrees) has been opened up for even more airflow. On the dyno the wheels are picking up 30-50rwhp and hold about 5-10psi more of boost on a well thought out setup. Wheels are also 20 grams lighter then the originals as well. Call us or PM us for upgrade pricing. :ft:

 

[Lostnwalmart]

You guys are always raising the bar!

 

[not enoughsmoke]

damn Straight. Is this that 67mm wheel? Josa

 

[DRTurbo]

Its a 75mm drop in wheel. The 75 is by far the most popular S400 wheel for diesels. So we started with it. Will go up and down on the sizes shortly.

 

[zstroken]

What were the reasons for wanting the 7 blade? Higher PR?

 

[9724VF350]

Paying close attention. Have a billet 6 blade now, always looking to go faster.

 

[straight 6 roar]

How does it compare to the 11-blade?

 

[keifferscummins]

How does it compare to the 11-blade?

I would also like to know this?

 

[bracker8040]

Side view of the wheel?

 

[not enoughsmoke]

Its a 75mm drop in wheel. The 75 is by far the most popular S400 wheel for diesels. So we started with it. Will go up and down on the sizes shortly.

would this 75 better than the 67 for a secondary Josa?

 

[DRTurbo]

How does it compare to the 11-blade?

Compares very close to the 11 blade. Designed to be a drop in for some classes coming down the pipe that are planning to outlaw non-conventional design compressor wheels.

 

[DRTurbo]

would this 75 better than the 67 for a secondary Josa?

What will the primary be?

 

[not enoughsmoke]

What will the primary be?

that new 80 or maybe 88mm

 

[DRTurbo]

75 would be a little to close to the 80 and 88. Max I would lean with is the 72mm.

 

[DRTurbo]

For those asking the 1st batch of them have left. Reiff Diesel just got the 1st one today...they should have some customer results soon.

 

[LReiff]

For those asking the 1st batch of them have left. Reiff Diesel just got the 1st one today...they should have some customer results soon.

Yes we did! Thanks again and have a merry Christmas!

The wheel does have quite a bit of flow improvement over the cast version.

 

[05_LLY]

Side view of the wheel?

Ill second this, maybd next to a cast wheel!

 

[DRTurbo]

Next to cast wheel. As you can see, smaller hub, staggered blade angle on the hub, also the inducer blades start higher on the hub and taper down to the same height as cast do as well. Also the primary to secondary blade angles are larger versus the cast one follows the same angle. In other words effectively making the wheel as large an area hitting atmosphere as possible that we can still keep 75mm.

 

[DRTurbo]

Yes we did! Thanks again and have a merry Christmas!

The wheel does have quite a bit of flow improvement over the cast version.

I don't see nothing lol

 

[05_LLY]

Nice peice.....thank you for pics.