new valve body!!

RDPsmoker

RDPsmoker

OUT TO LUNCH..
Joined
Nov 25, 2010
Messages
1,815
Well finally got some stuff sold around the house and was able to order a valve body.9 I went with a suncoast mainly because that's what we sell at the shop. Was wonder if anyone knew were to get a weld in drain plug or any ideas on making one.
 
Shouda got a Goerend Constant pressure!:doh: Buy a pan you can find a cheap one on ebay they are way better than stock!
 
I took a 1/2" nut and welded it inside the pan where it wouldnt hit the filter or anything. then just use a short bolt and a fiber/copper/alum washer so that it seals good.
 
Your gonna have to ask dave at Goerend about it! or maybe someone that wants to explain it will chime in! Just to much to explain.
 
Another reason for Suncoast is its what we sell. Little easier to sell stuff when you run it.
 
The 05+ trucks have a TV motor that isn't the most reliable, and when it fails you can destroy the trans in short order.
 
zstroken said:
The 05+ trucks have a TV motor that isn't the most reliable, and when it fails you can destroy the trans in short order.
Click to expand...

Ours broke a few teeth, caused a hang in 2nd gear, shifted roughly around 2400rpm. that thing is expensive. :doh:
 
You must log in or register to reply here.
Back
Top