Thank you, any chance you want to say what size jet you use.
I was thinking of something like NOS's sneeky pete system, but I really know nothing about no2.
Yeah its only a .025
As far as a progressive system, that'll be expensive for what your wanting to do. You just need a bottle, some lines, jets, a solenoid, and a momentary push button if your just wanting spoolability
If you are wanting to actually spray on the run, then the progressive system will be what you want. You can control the amount of nitrous through rpm or boost reference, and ramp it up and down, in and out however you want. You have so much control over it (if you know what doing) that you just run a pass through jet (.136) and never need to jet it down since you control flow and amount by a computer. It's legit!
What we do with our nitrous & progressive controllers:
Stab of the trans brake-shot of .025
Wide open throttle- 0-100% in .95 seconds with .136 jet
Release of trans brake- 0-100% in .95 seconds with .136 jet
2.50 seconds into 1/4 mile pass, water/meth is activated 0-100% in .50 seconds, also controlled with NX progressive controller.
A lot of info there, some needed, some not. But thats how we do it