redneckroot
It must not have spark
- Joined
- Mar 28, 2009
- Messages
- 413
The truck: project truck that I've been working on, 1990 w250 727 auto, finally ready to get it started.
The problem: Turn key nothing happens, i have lights but nothing related to starting, there is no power at the neutral safety switch, and I am not sure what is suppose to have power with key off or on at the key switch. the column has been rewired from a 90 column to a 93 using the 90 wiring diagrams and the 93 diagrams when hooking up the wires, so there shouldn't be any problems there. Anyone that has any idea even where to start on figuring this out would be a big help, it is suppose to be running and drivable by June 30th, and hopefully pulling on July 10th so I am running out of time. I'm pretty good mechanical, really lost when it comes to electrical.
The problem: Turn key nothing happens, i have lights but nothing related to starting, there is no power at the neutral safety switch, and I am not sure what is suppose to have power with key off or on at the key switch. the column has been rewired from a 90 column to a 93 using the 90 wiring diagrams and the 93 diagrams when hooking up the wires, so there shouldn't be any problems there. Anyone that has any idea even where to start on figuring this out would be a big help, it is suppose to be running and drivable by June 30th, and hopefully pulling on July 10th so I am running out of time. I'm pretty good mechanical, really lost when it comes to electrical.