No start when Hot only

[Jim Fulmer]

This might tie into another thread, the 2003 max has a no start issue when hot only, cold or after it has set for 5-6 hours it's fine.

I'm not too smart on on Maxes but this can't be too difficult.....search didn't come up with much!

Jim

 

[GRotman]

Injector return flow excessive when warm. Measure the return flow from each head into a graduated cylinder. This will tell you which bank is the culprit, or both banks.

 

[JD4440]

hmmm.....

 

[Jim Fulmer]

Kind of what I was thinking in my 12v mind, thanks Glenn, about to post another similar one for a C/R.

Jim

 

[smokey30265]

Mine did this when the injectors were bad