This is the pump and all associated parts to bolt it up on a 1st gen and probably most of the parts to put it on a 24v ( Ive never done a p-pump on a 24v so I dont really know what other parts you would need.)
I was gonna use all these parts on the 1st gen motor in my chevy but Im just going to swap in a complete motor I pulled from another truck.
I removed all this stuff off a running 135k mile 95 2500 man. trans truck.
I personally put around 200-300 miles on the truck before it was dissambeled and it ran fine w/no problems etc... It even still had the stock fuel plate in it.
Will include the following.
Pump
Pump gear.
Timing case.
Case cover.
Stock injectors.
injector lines and clamps.
oil line and fittings for pump.
All hardware.
And anything else Im forgetting to bolt it all on.
Asking $1200. May trade for a 64mm HTB2 or PS64 type turbo. Used is ok as long as its good.
I was gonna use all these parts on the 1st gen motor in my chevy but Im just going to swap in a complete motor I pulled from another truck.
I removed all this stuff off a running 135k mile 95 2500 man. trans truck.
I personally put around 200-300 miles on the truck before it was dissambeled and it ran fine w/no problems etc... It even still had the stock fuel plate in it.
Will include the following.
Pump
Pump gear.
Timing case.
Case cover.
Stock injectors.
injector lines and clamps.
oil line and fittings for pump.
All hardware.
And anything else Im forgetting to bolt it all on.
Asking $1200. May trade for a 64mm HTB2 or PS64 type turbo. Used is ok as long as its good.