C'ya
I bleed Scarlet and Grey
- Joined
- May 23, 2007
- Messages
- 485
I bought this motor torn down on a pallet. It had a broken ring in number 6 other than that I do not know any history on the motor. The motor has a build date of 10-2-2006. I have a complete motor minus the turbo, ecm, and wiring harness. As far as I know all parts are in good working order but I never saw the engine run so I cannot guarantee that they work. If you buy something that isn't satisfactory you can return it within a week of receiving it, but none of this "its sat on my shelf for two months and now I discover you sold me a piece of junk" crap.
All prices are plus shipping. I can get good freight rates for the large items.
Head, block, and crank are going to the machine shop unless someone is interested in them as is. I will list those up later.
Injectors, do not know the condition of them will sell them "as is" as cores $600 or make offer
Injector feed tubes. $40 obo
[/URL][/IMG]
Fuel Rail with lines PRV and RP sensor $200
[/URL][/IMG]
CP3 pump $325
[/URL][/IMG]
Complete set of rockers. Some light galling in the pins but overall fair condition. $100
[/URL][/IMG]
Complete valve cover, all three pieces with new lower gasket. Good condition other than the injector wiring nuts were removed from the harness for some dumb reason. $100
[/URL][/IMG]
New in wrapper Victor Rienz .020 over head gasket $50
[/URL][/IMG]
Fan clutch $50
[/URL][/IMG]
Oil pan some dents but no rust $90
[/URL][/IMG]
BNIB head bolts $50 obo
[/URL][/IMG]
Manifold $75 obo
[/URL][/IMG]
Sensors, block heater $75 for all in pic or $20 each
[/URL][/IMG]
All prices are plus shipping. I can get good freight rates for the large items.
Head, block, and crank are going to the machine shop unless someone is interested in them as is. I will list those up later.
Injectors, do not know the condition of them will sell them "as is" as cores $600 or make offer
Injector feed tubes. $40 obo
Fuel Rail with lines PRV and RP sensor $200
CP3 pump $325
Complete set of rockers. Some light galling in the pins but overall fair condition. $100
Complete valve cover, all three pieces with new lower gasket. Good condition other than the injector wiring nuts were removed from the harness for some dumb reason. $100
New in wrapper Victor Rienz .020 over head gasket $50
Fan clutch $50
Oil pan some dents but no rust $90
BNIB head bolts $50 obo
Manifold $75 obo
Sensors, block heater $75 for all in pic or $20 each
No ecm, dents are pictured, I don't know the mileage on the injectors. 
