crackerman
New member
- Joined
- Jan 29, 2010
- Messages
- 1,800
Go down to the local steel yard and buy surplus bar stock by weight, cut it to length and shape for your press plates, golden for cheaper.
Go down to the local steel yard and buy surplus bar stock by weight, cut it to length and shape for your press plates, golden for cheaper.
or you could shop riv's driveway.
:hehe:
http://www.pirate4x4.com/forum/55-shop-tools/
Tons of press threads here. Also lots of info on pimping an HF special.
Like somebody said just don't use the HF press plates... they're like mexico and the water...
That's a 12 ton though, one I linked is the 20 ton.
Be careful on some HF presses
They are now selling grey ones with actual steel press plates
However, alot of the orange presses use cast plates that have cracked and exploded
What are you wanting to do in the sheet metal bending department?
That's a 12 ton though, one I linked is the 20 ton.
Sent from my iPhone using Tapatalk
Don't worry neither one of those will get past 5 tons without blowing apart anyway. If anything it seems like their smaller ones hold up longer before they deform or flat out fail.
The one I just bought tonight is the gray one. I'll look at swag off-road and pirate for upgrades and tools to go along with it.
Sent from my iPhone using Tapatalk