rattlebox93
New member
- Joined
- Sep 10, 2008
- Messages
- 181
i just built this engine it has less than 10 miles on it machine shop put the rotating assembly in it i did everything else now there is a rattling noise coming from the front of the engine if you idle it at about 2000 or if you rev it up it will rattle then it is coming back down to idle i re checked the torque on everything the machine shop did its all the same pistons and everything just a ring and bearing job while i had it out from the kdp getting me any ideas and gears or anything in the front that would make that kind of noise? thanks dj