Rust free CC Ram 3500 parts

[Mark Nixon]

Picked up a TWO WHEEL DRIVE 3500 Dually 2wd, 5 speed club cab, with zero rot out.

Parting out as follows:

Engine, has 315,000 miles, comes minus starter and block plate, with all of the front accessories (fan is bent) and turbo, $1300.

2WD 5 speed conversion, pedals, hydros, shifter, boots, trans, flywheel, block adapter, bell, $1400.
May part engine, pump alone is $750.

The cab, doors and fenders are clean, both fenders have dents above the headlights, but look like they could straighten easily.
The interior is trashed, no seats or plastic worth saving.

Have other parts off this truck, as well.

Reply, PM, Call or Text 402-780-5127.

 

[Strokersace]

What year model?

 

[Mark Nixon]

The truck is a 1996 3500 2wd 5 speed.
Can't believe I left out a little tidbit as important as the model year. :nail:

Was just out trying to fire up the engine and it was so down on compression, that it would NOT even wince at ether, so I'm going to part the engine out as follows:

Injection pump, 215HP '887 pump, $750 SHIPPED.

Timing case, $165 SHIPPED.

Pump gear, $85 SHIPPED.

Manual transmission throttle linkages, main bracket, 'S' rod and throttle lever bracket, $135 SHIPPED.

Vacuum-P/S combo pump, $175 SHIPPED.

Oil lines for combo pump and injection pump, w/tee, $65 SHIPPED.

Injector return line, will include the 6 little banjo bolts, $60 SHIPPED.

Injector lines, with all isolators and bolts, $125.

Steel heater lines, with supports/clamps, $50.

Anything else, just ask!!!

 

[strokin02]

The truck is a 1996 3500 2wd 5 speed.
Can't believe I left out a little tidbit as important as the model year. :nail:

Was just out trying to fire up the engine and it was so down on compression, that it would NOT even wince at ether, so I'm going to part the engine out as follows:

Injection pump, 215HP '887 pump, $750 SHIPPE



Timing case, $165 SHIPPED.

Pump gear, $85 SHIPPED.

Manual transmission throttle linkages, main bracket, 'S' rod and throttle lever bracket, $135 SHIPPED.

Vacuum-P/S combo pump, $175 SHIPPED.

Oil lines for combo pump and injection pump, w/tee, $65 SHIPPED.

Injector return line, will include the 6 little banjo bolts, $60 SHIPPED.

Injector lines, with all isolators and bolts, $125.

Steel heater lines, with supports/clamps, $50.

Anything else, just ask!!!

I'm in need of a club cab 94/98 an front clip really a whole body would be great... thanks mark

 

[Mark Nixon]

I'd sell the roller, minus the flatbed, engine and transmission, for $1500 picked up here.
I do have the title.

Pics are attached.

Mark.

 

[Mark Nixon]

Transmission setup is SOLD.
Complete engine is SOLD.

Cab is no longer savable, but fenders, doors and rockers are still usable.

The short list of what remains:

Dually Dana 80, $400.

2-piece rear driveshaft, will also fit 4x4, $150.

Front hubs, unicast rotor units, $50 each.

Or I'd sell the 2wd running gear for $800 with wheels and tires.

Ask about any parts not listed.

Mark.

 

[Strokersace]

I bought the engine a year ago from Mark. Haven’t done a thing with it and the plans for my project have changed. Going with a different Diesel engine instead of the 12 valve.

Going to be putting it back up for sale. Mark, you interested in buying it back? Lol