Dockboy
Comps BFF
- Joined
- Apr 26, 2006
- Messages
- 3,341
S366/0.91 over Billet S483/1.10 twins with 2 JGS 50mm wastegates. Complete setup with ATS exhaust manifold (8 tapped holes for back pressure & egt probes, t3-t4 adaptor, welded flange for secondary wg), hot pipe with wg ports, 3" intermediate pipe, 4" down pipe with wg port, primary mounting bracket with oil drain. All hardware and piping included. Will need secondary oil drain.
Setup was on a 5.9 Common Rail Ford/Cummins Drag truck with no heater box. May need to modify piping depending on vehicle.
Twins made 1187 hp fuel only on chassis dyno. 105 psi boost w/ 95 psi back pressure on the track
10 Passes on turbos since freshened up.
Do not want to seperate.
$3,600 plus shipping
Setup was on a 5.9 Common Rail Ford/Cummins Drag truck with no heater box. May need to modify piping depending on vehicle.
Twins made 1187 hp fuel only on chassis dyno. 105 psi boost w/ 95 psi back pressure on the track
10 Passes on turbos since freshened up.
Do not want to seperate.
$3,600 plus shipping
