Time to part ways with my shortbed cummins that I built. Planned on doing body work and paint but ended up liking the sleeper scrap truck style instead. Do not want to sell it at all, but i am moving and cannot bring it with me. This is everything i did to it and have receipts for almost everything. I am sure i am forgetting a few things.
AIR:
S366SXE
FUEL:
5x.018 PDD injectors
215 PPump maxed and balanced (600cc) 21 degree timing
.093 DV holder
comp cut DV
4k gov springs
OFV
AFC LIVE v2
Airdog 165 with sump
Stock fuel pump delete
TRANSMISSION:
nv4500
southbend dual disk clutch
1.35” billet input shaft
Transcooler
5th gear nut tightened
ENGINE:
ARP Studs
150lb valve springs
head gasket
O-ringed block
DPS 3 piece manifold
188/220 hamilton cam
hamilton heavy duty push rods and tappets
Wheels:
20x10 fuels
285/50/20 toyo S/T2
It has 3" drop shackles in the rear and overload leaf removed. Has 5% tint all the way around and 40% on windshield. I also have brand new still in box tail lights and front and rear bumpers along with tons of the stock parts that I upgraded. Have exhaust setup for a stack or to run a 6" tip out the back corner. Truck is my daily driver and is a blast to drive around town. Turns heads everywhere I go and always have people coming up to talk to me about it. Especially after I blow the doors off dudes in brand new cars or trucks. Have hundreds of pictures of the progress of the build. Asking 17k OBO
AIR:
S366SXE
FUEL:
5x.018 PDD injectors
215 PPump maxed and balanced (600cc) 21 degree timing
.093 DV holder
comp cut DV
4k gov springs
OFV
AFC LIVE v2
Airdog 165 with sump
Stock fuel pump delete
TRANSMISSION:
nv4500
southbend dual disk clutch
1.35” billet input shaft
Transcooler
5th gear nut tightened
ENGINE:
ARP Studs
150lb valve springs
head gasket
O-ringed block
DPS 3 piece manifold
188/220 hamilton cam
hamilton heavy duty push rods and tappets
Wheels:
20x10 fuels
285/50/20 toyo S/T2
It has 3" drop shackles in the rear and overload leaf removed. Has 5% tint all the way around and 40% on windshield. I also have brand new still in box tail lights and front and rear bumpers along with tons of the stock parts that I upgraded. Have exhaust setup for a stack or to run a 6" tip out the back corner. Truck is my daily driver and is a blast to drive around town. Turns heads everywhere I go and always have people coming up to talk to me about it. Especially after I blow the doors off dudes in brand new cars or trucks. Have hundreds of pictures of the progress of the build. Asking 17k OBO