jlbayes
New member
Matts killed odd parts most don't.
"Stubby" My 10 second Street/drag truck build
- Thread starter Macktruckdriver
- Start date
Matts killed odd parts most don't.
Macktruckdriver
New member
Snagged my friends old head and intake off his pulling truck. Should work nice.
Macktruckdriver
New member
Well went to some dirt drags this weekend just to play.
jlibert
New member
Well went to some dirt drags this weekend just to play.
That is a mean looking setup. Whay were your times at the drags?
Macktruckdriver
New member
Crappy set of paddles I borrowed. Needed bigger diggers. Only got 2 passes fastes was 4.5. Pretty slow. Was fun to try. Post videos once they load.
CREED1
Throwed Off
Mines been functioning in my one ton drag truck since 2005 flawlessly.. 1200hp on a 33x17x15 slick.
Macktruckdriver
New member
Anything done to it? Spool? Aftermarket axles? Mine is LS.
mathews8pt
New member
I've been abusing my 70 in my 4wd truck for years. Never had an issue but I've only hooked to the sled a few times.
Dirt drags are fun but a 2wd truck would be tough to compete with unless you have your own class
Sent from my iPhone using Tapatalk
Dirt drags are fun but a 2wd truck would be tough to compete with unless you have your own class
Sent from my iPhone using Tapatalk
Macktruckdriver
New member
Buddy Matt did way better and almost won but he had super scoops and much more HP.
zstroken
For $$$ your name here
Can't you just restack the factory clutch plates in the rear? Maybe stick an ARB in the back?
Macktruckdriver
New member
Right now it works good. Matt has the other short box and he killed like 3 70s so gave up and that was only at like 600hp. He put an 80 in. His weak point was the spider gears would grenade. Id like the 70 as it's lighter but no one makes a spool for one. I'm planning on a 9" once I back half it but that will probably be next winters project so want to make the 70 work for now.
Macktruckdriver
New member
Might just stick my C&C 80 in it so I can tuck tires a little better and not worry about it.
CREED1
Throwed Off
Macktruckdriver
New member
I was thinking about welding it since the spiders were the issue. Disc break was my next thought.
zstroken
For $$$ your name here
I blew the spiders on a D80 on the first hook.
The open spiders are decent, the posi spiders are very problematic.
Macktruckdriver
New member
I blew the spiders on a D80 on the first hook.
That's why I'd like a spool or weld it. Curious if anyone makes a disc brake conversion for the C&C
Chrisd91
New member
Best bet would be to buy a wheel shell and have a center welded in at the backspacing you need
Macktruckdriver
New member
Haven't been able to find a place to do something like that. Where do I start?
