stumped... no power

[gododge99]

2001 ram, all stock. came in with no power, changed the vp and added a fass 150 with sump. fired it back up and still no power... no codes. starts fine and idles smooth its almost like its not making any boost. replaced the map sensor and checked all the boost lines and clamps still nothing. any ideas?

 

[dieselbeef]

lots of em....search my threads

 

[gododge99]

cant find s**t. is there any other sensor that would limit fueling? tps seems to be good

 

[jedeka]

Wastegate?

 

[jlbayes]

Smoke? Have you confirmed it is actually making boost?

 

[gododge99]

after running a series of tests we determined we had a faulty (new) map sensor, went out in the yard and pulled one from another truck and voila!

 

[CorneliusRox]

after running a series of tests we determined we had a faulty (new) map sensor, went out in the yard and pulled one from another truck and voila!

Thanks for updating the thread! :clap:

 

[Ram12vcummins]

So you replaced the vp and added fass just to see? Sounds expensive.

 

[gododge99]

So you replaced the vp and added fass just to see? Sounds expensive.

it had a death code and no power when it came in... after doing several vp's in the past i would assume the vp was bad. which it was. we also like to install aftermarket fuel systems on these trucks when installing a new ip cause the stock ones are crap.

 

[96blacksmoke]

What was the "death code" that you was getting if you don't mind me asking?

Sent from my XT1254 using Tapatalk

 

[Johnyb59]

What was the "death code" that you was getting if you don't mind me asking?

Sent from my XT1254 using Tapatalk

Probably a 0216.