D Twigg
Starting to understand
- Joined
- Jul 17, 2008
- Messages
- 665
I've done the searches and done the reading but I'm still on the fence of somethings. I'm currently waiting to finally have my motor finished up. It's going to be .020 over, 188/220 cam stock bearings etc. The shop that is doing the assembling the motor for me wants to fire it up after they put it together and let it run a couple times before I retake possession of it to make sure there is no leaks and it runs fine. I'm just wondering if this will cause issues with anything in the motor especially the new cam. I'm also still on the fence with the break in time on it. I'll be sending the turbos out to be rebuilt and I'm tossed between let it warm up and run it like I stole it a time or two, or put about 500 miles on it before I run it hard. I want to take it and run it like its going to be run right away but I'm not sure what to do about the turbos. Any insight is appreciated.
Thanks, Twigg.:thankyou2::thankyou2:
Thanks, Twigg.:thankyou2::thankyou2: