The Baby Truck

[Lostnwalmart]

I have been kicking around the idea of a new project and the wife and I may be leaving the US in a year. So I figured it may be time to judge interest/sell the Baby Truck. This thing has been an ongoing project for some time and things will be added to it before it sell I’m sure. It has been an extremely fun truck that started out as a 2500 sclb and the frame was chopped 16ish inches rewelded along with some 1/2in plate and now is a scsb. As far as price goes, I’m going to start out at $26,000 but don’t be afraid to offer me less. I would entertain trades in the sports car/newer 4x4 truck/gold bars/ cocaine/ jeep/ another awesome project. I have done 95% of the work to the truck myself which may be good or bad LOL now to the details.

List of things currently done to the truck

Engine
625 head studs
175lb Hamilton valve springs
Hamilton extreme duty push-rods
Hamilton 188/220 cam
Ported polished Hamilton head was flowed on Zach’s bench in the 220cfm range, Head is also O-ringed.
Ati super dampener.
Stock pistons and crank with aprox 290,000 ish very little blow by. no scoring or damage to pistons the last time the head was off.
electric fans

Fuel
Weston’s 5x20 sac injectors
13mm pump built by Seth all bosh parts except for Zach’s quick rate cam 500cc to 770cc with 181 dv's
Stock dv holders and stock fuel lines.
A1000 and cat filter with aeromotive regulator.

Air/exhaust
Custom built twin turbo's 63/68 .83t4 secondary with at gt50 85mm compressor and a 1.08 turbine housing primary.
One off stainless steel header from polydyne, coated by polydyne.
50mm JGS gate
HTT inter-cooler
Full 5" exhaust with fte resonator and muffler (I think its a silver line kit)

The transmission has a suncoast hd rebuild kit with a billet input
tfod3 manual vb
Cheetah scs shifter
Deep pan
Steel planetary’s
DPC converter

Body/Chassis
Short bed swap obviously
06 cloth seats (Possibly leather recover soon)
Led rear brake and tail lights
One piece headlights
Duraflex srt hood
Duraflex srt front bumper
Sport front grill
98 and up mirrors non towing version
Soft bed cover
New front end suspension parts and steering parts.
Cal-Tracs with 2 leaf springs in the rear
Sport truck shock in the rear adjustable ranchero 9000’s in the front
Dana 70 rear with 3.55 gears drum brakes with gm hydros and welded rear, I have a dana 80 with posi and disc brakes purchased.
New one piece drive shaft
Nitto 420’s 305/50 r20’s
Will also come with M/T ET street 2’s 315 60 r15’s drag radials

I’m sure I have forgotten some things but will add to this thread as necessary.

Now for ze pictures (not all are of the current setup).

And of course a few videos, none of which are from the current setup LOL
https://www.youtube.com/watch?v=Rp1x0uYaZS0
https://www.youtube.com/watch?v=qOxm1rAERkM&list=UU6rv60JqChCvlSxVrbyum-Q
https://www.youtube.com/watch?v=BWenGvfHW1M&list=UU6rv60JqChCvlSxVrbyum-Q
https://www.youtube.com/watch?v=NvuVyyZ7Hwo&list=UU6rv60JqChCvlSxVrbyum-Q
https://www.youtube.com/watch?v=aUmgIsUUuxg&list=UU6rv60JqChCvlSxVrbyum-Q

 

[WUnderwood]

booooo Cliff, boooooooo

 

[Lostnwalmart]

booooo Cliff, boooooooo

meh I doubt it will sell any time soon.

 

[SDS97_7.3]

If I had the cash on hand I'd already have a flight to TX booked, GLWS.

 

[TheSilverBullet]

How the hell did you get that hood to fit so good????

 

[BWC]

May have missed it but what were the track times?

 

[Ford diesel girl]

Sent from the desert

 

[madmikeismad]

Stock rods? Can't afford it, but I didn't see it above LOL What was the highest it dyno'd?

 

[Lostnwalmart]

How the hell did you get that hood to fit so good????

The duraflex hoods are made for the second gen trucks.

May have missed it but what were the track times?

The last time it was at the track it was a single gt4202 and a 160 pump LOL the new setup has yet to be track proven. I hope to fix that sooner than later.

Stock rods? Can't afford it, but I didn't see it above LOL What was the highest it dyno'd?

yes stock rods/crank/pistons. The newest setup hasn't been dynoed but the latest dyno was at dex's event last year. Where the chargers would not load.

 

[Phooker]

I need to ride over for a mexico trip. That truck needs right side ballast.

 

[Lostnwalmart]

I need to ride over for a mexico trip. That truck needs right side ballast.

disagree with this I do not.

 

[B.A.Ram]

So 290 on the clock?

 

[94 12valve]

very sharp looking truck

 

[Lostnwalmart]

So 290 on the clock?

you dun did read correctly, it was stock for 260,000 of those LOL

 

[Schrowang]

I must has!

 

[B.A.Ram]

 

[displacedtexan]

I've ridden in it.

Was Meh.

Sent from my HTC One using Tapatalk

 

[displacedtexan]

I mean, come on, it's a fast little race truck. Who like that?

Sent from my HTC One using Tapatalk

 

[madmikeismad]

And its white. *****es don't like white trucks.

 

[B00ST00]

Truck is nasty, goodluck with the sale!


Sent from my iPhone using Tapatalk