adamsmarshall
Drilling Crooked Holes
- Joined
- Oct 12, 2008
- Messages
- 1,915
Ok so I know this has been dabbled in but never fully discussed but I had a few questions for those who can possibly answer.
I'm swapping my 04 over to an 06 ECM, this has been discussed so I'm not going there exactly.
What I'm wondering is if I just get a TIPM and the harness will the harness connect to the 04 a/c controls or is it a different plug and/or board in the controls which would interfere with the communication.
I know I can swap the entire dash out with all the 06 stuff and everything should work but if I could just swap in the TIPM, harness and 06 gauge cluster it would make life that much cheaper and easier.
Thanks for any insight into this
I'm swapping my 04 over to an 06 ECM, this has been discussed so I'm not going there exactly.
What I'm wondering is if I just get a TIPM and the harness will the harness connect to the 04 a/c controls or is it a different plug and/or board in the controls which would interfere with the communication.
I know I can swap the entire dash out with all the 06 stuff and everything should work but if I could just swap in the TIPM, harness and 06 gauge cluster it would make life that much cheaper and easier.
Thanks for any insight into this