toe-in

[nilsson]

Did someone know how much toe-in i shall have, in mm(or inch), if i measure on the rim? 16 inch rim.
Thanks.

 

[TheBigNasty]

I've always been told 1/4" on the tire. I'm sure that it would depend on the tire diameter to get the correct toe in using just the rim.

 

[LReiff]

1/16" - 3/32" depending on driving style, weight on front axle etc.

 

[nrose07]

There is a sticky on TDR about this. Been years since I was there but a dodge engineer spec'd out the perfect alignment to make driving a pleasure. As I remember it usually took adjustable ball joints to meet the specs.

 

[BluegrassDiesel]

1/8" toe in is what I have always heard.

 

[Smokie Okie]

1/8" toe in is what I have always heard.

I've always set everything from semi's to half tons at 1/8th. $.02

 

[nilsson]

Thank you all.

 

[wannabehero]

I have a 5.5" long arm kit on mine with 35s and i set the toe at an 1/8 to a 1/4 and ive had no issues nor irregular wear

 

[ChuMaDD]

1/16" - 3/32" depending on driving style, weight on front axle etc.

^^ Ditto