Tranny tools

really helps to have the clutch compressors, makes the job alot easier. Other than that, some good small angle prybar to get the snap rings out.
 
Hey Noreaster You will need a couple different pairs of snap ring pliers, torque wrench and some assorted basic tools.If you need help give us a call
 
custom screwdrivers help a lot for extracting the circlips and snap rings.

You will also need something custom to compress the c2 spring cage.

but then, you probably didnt want my input anyways. what do I know?
 
duratothemax said:
custom screwdrivers help a lot for extracting the circlips and snap rings.

You will also need something custom to compress the c2 spring cage.

but then, you probably didnt want my input anyways. what do I know?
Click to expand...
Custom screwdrivers? Doesn't Trippin have a tool for that?
Well you did your own, any tips are appreciated from anybody.
 
C.A.P said:
looking to do your trans are ya AJ ?
Click to expand...
Yes, finally have the dough to drop on it, been wanting to do it for the last couple years but cards would never line up.
 
massdiesel said:
Hey Noreaster You will need a couple different pairs of snap ring pliers, torque wrench and some assorted basic tools.If you need help give us a call
Click to expand...
thanks Scott
 
Go to a Sear and pickup a pry bar for about $10

Craftsman #43275

You will need to grind the sides of the tip off as it's to wide but once you fit it so that it fit into the rib area of the case it will take the snap rings right out. Believe me it's well worth the time to get it.
 
You must log in or register to reply here.
Back
Top