I just rebuild my motor and I can't get it to warm up, I replaced the thermostat and before you say the gauge is bad... It's even just warm to the touch even after driving almost 200 miles today.
At idle or around town it climes to 165 but after driving on the highway for 5 mins it will drop down to the line 140 and stay.
I wonder if I overbuilt the cooling system?? But it drives amazing!
Engine was bored .020 over
370 marine cam
155 Mahle pistons
Thicker gasket & studs
7x105 DAP inj
HE351 turbo ported
Fluidamper
Bigger fuel lines all the way through
Pump has; 4k gov springs
60lb valve springs
Benched to flow 400 Stock DVs
Also it has all custom tig welded aluminum Interooler piping and a 5in aluminum intake
At idle or around town it climes to 165 but after driving on the highway for 5 mins it will drop down to the line 140 and stay.
I wonder if I overbuilt the cooling system?? But it drives amazing!
Engine was bored .020 over
370 marine cam
155 Mahle pistons
Thicker gasket & studs
7x105 DAP inj
HE351 turbo ported
Fluidamper
Bigger fuel lines all the way through
Pump has; 4k gov springs
60lb valve springs
Benched to flow 400 Stock DVs
Also it has all custom tig welded aluminum Interooler piping and a 5in aluminum intake