Valair street triple- under 2k miles (g56)

ndaniels

New member
Joined
Feb 24, 2013
Messages
176
$1750 pick up only- located in Ohio by Dayton.

Clutch is just a little too grabby for what I do with my truck and I'd be better suited with a street dual disc, so I pulled it out. For a guy that abuses his clutch, or is going to make over 750hp, it'll be perfect. Has less than 2k miles on it since I installed it on 2/20/16.

Flywheel spacer got nicked up a tiny bit while prying it off the crankshaft. Won't affect it in any way. Sucker was a tight fit!

Pm me, or email 1998daniels@gmail.com or text 4one9-2three4-3227

601A8A99-3A26-4CC5-8B28-AE9C8AC0EB38_zpsygrimclf.jpg


0C59B656-8525-43C8-A985-08AF94528084_zpsdey4ukmo.jpg


DDEC2439-E2AD-493E-BC87-184519808269_zpsyvkvegzn.jpg


56B3554B-D718-4BCA-B9F8-DD51713F2B2E_zpsuglnz13q.jpg


D3A75A21-A675-40C4-A01B-1086C4897365_zps7bbi7uxs.jpg
 
Last edited:
FYI I believe that will work with a NV if you discard the spacer. Worth a call to valair to confirm that.
 
Thanks, B. If that's the case I wonder if it would work on a nv5600 too? Be worth checking into with Dan.

I can also meet within a reasonable distance for the price of fuel. Maybe able to ship but it's heavy as hell- 120lbs. Best bet for shipping would probably be to box it and strap it to a pallet for a freight shipment. Shipping would be on the buyer.
 
Give valair a call to confirm that. I wanna say thats the case but that needs to be verified.
 
It will work with the 5600- just don't run the flywheel spacer.

It'll also work in a nv4500 with the bigger input shaft with the addition of a starter spacer.
 
If I had extra cash, I'd snatch it up. Free bump.

Sent from my SM-S902L using Tapatalk
 
Call it sold if you still have it in December. Until then... GLWS.
 
Any interest in a trade for a freshly rebuilt dual disk from Kennys? It would be going in my 95 so you can keep the spacer. Thank you.
 
That thing make alot of noise or not too bad

It made noise with the g56. My street dual disc is way quieter but the triple is plenty tolerable. I also did everything I could to quiet it down. Mobile delvac50, fluidampner, and added trans coolers to increase capacity to deaden sound as much as possible. It did shift a lot faster than my dual disc- I've heard the stories on triples being faster and didn't believe it until I experienced it myself.
 
Last edited:
Back
Top