C Cratos New member Joined Sep 23, 2008 Messages 58 May 20, 2010 #1 anyone konw what the shimmed installed height is on the comp 910 springs. 1.870 1.780.??
D ddc60series New member Joined Aug 17, 2010 Messages 10 Aug 17, 2010 #3 trying to get 10 post to contact a member,,,,sucks
9 96fordstroker New member Joined Sep 7, 2010 Messages 16 Sep 13, 2010 #7 1.850 looked it up in the comp book in the machine shop i work in any other info needed?
9 96fordstroker New member Joined Sep 7, 2010 Messages 16 Sep 13, 2010 #8 but if you go with the 1.870 you will have more valve spring clearance and it won't lower seat pressure enough to worry bout
but if you go with the 1.870 you will have more valve spring clearance and it won't lower seat pressure enough to worry bout
C Cratos New member Joined Sep 23, 2008 Messages 58 Sep 13, 2010 #9 so no need to change push rods then ?
9 96fordstroker New member Joined Sep 7, 2010 Messages 16 Sep 13, 2010 #10 depends on cam and lifters that determines push rod length you can change spring installed height and not change push rods . . .
depends on cam and lifters that determines push rod length you can change spring installed height and not change push rods . . .