vp44 lines order/diagram

[skyler1101]

i need to know the order of where the lines go from each hole to the back of the vp 44 i installed .093 lines tonight and when started i had a definite miss i have them wrong on the back somehow any help would be greatly appreciated i cant find a diagram anywhere of how they line up

 

[VMacKenzie]

Injector line at output side of VP44 for cyl #1 is at 6 o'clock position, lowest one, and going counterclockwise from there in order gets you cylinders 5-3-6-2-4

 

[Headcase98002]

What VP, tubes and injectors are you running?

 

[dirtydiesel]

Does it only miss at idle?

 

[LReiff]

 

[skyler1101]

Thank you very much guys help is greatly appreciated

 

[skyler1101]

What VP, tubes and injectors are you running?

blue chip hot rod vp 7x14 cpp injectors

 

[Headcase98002]

Not saying this is your problem. But from switching from .063" lines to .094" there is a lot of extra space to be filled per-injection event and will retard injection timing. I have seen on a few trucks that switch over to larger lines/tubes will cause a rough idle.

I don't even want to get started on Chip!