deerefanatic
Always learnin...
Hey guys, getting the last bits of my Chummins wrapped up. Gettin ready to do the water injection. I have a Cooling Mist controller that I'm going to set up for 2 stage injection. I've got the 220psi Snow performance pump, and a 100 and 175cc nozzles...
Truck is a 12v with 188/211 (reground industrial cam) and H1c/HT60 twins with 5x16 sac injectors, 131 dv's, and soon to be racked pump barrels. I've got a water/air aftercooler that runs off of a heat exchanger (ford taurus radiator) out front. You guys think those nozzles will be big enough, or should I go bigger? I want to keep EGT's managable when towing.
Thanks for any input.
Truck is a 12v with 188/211 (reground industrial cam) and H1c/HT60 twins with 5x16 sac injectors, 131 dv's, and soon to be racked pump barrels. I've got a water/air aftercooler that runs off of a heat exchanger (ford taurus radiator) out front. You guys think those nozzles will be big enough, or should I go bigger? I want to keep EGT's managable when towing.
Thanks for any input.