Water/Meth new install

[mhuppertz]

Am getting a lot of blow-by so it is time to clean the ring packs!

How do I stage injectors? I want to come in with the 375ml nozzle then bring in the 625ml at higher boost.

Do the snow nozzles have a pop pressure or do I need to put a solenoid on the 625ml line and use a separate pressure valve to open it?

Or, am I just completely overthinking this?

 

[RED_SLED]

The snow nozzles do not have a pop off. Some have an integrated check valve. To have 2 stages you will need a second solenoid and have a water meth controller that is setup and made for activating a second solenoid. I personally have 2 625ml nozzles that start spraying at 12 psi and is at full tilt at 55psi. Hope that helps.

 

[mhuppertz]

Yes, that helps a lot. Thanks.

 

[madmikeismad]

You won't need 2 stages. I was running 2 of the largest devil's own nozzles at one time, that at full tilt would dump 2gal/min, enough to put the fire out.