WTB 12v engine parts

PSD0389

PSD0389

New member
Joined
Sep 23, 2008
Messages
622
Im looking for a couple 12v engine parts

Accessory bracket for ac compressor/lower radiator hose outlet

Fan pulley and mount

brackets for heater hoses that mounts on exhaust manifold

dipstick and dipstick tube

injector return line and banjo bolts

let me know what you have, thanks
 
I have a return line. And banjo bolt for fuel filter housing, possibly a dipstick tube and stick. Let you know tomorrow.
 
95cummins5.9 said:
I have a return line. And banjo bolt for fuel filter housing, possibly a dipstick tube and stick. Let you know tomorrow.
Click to expand...

Sounds good yeah let me know. I dont need the banjos for the fuel bowl though, just the banjos for the return line going into each injector
 
Jeep Cherokee and Durango will swap out with little length difference.
 
I have a/c bracket, lower radiator outlet and heater hose brackets, if the other people fall thru.
 
I have the following:

Accessory bracket for ac compressor/lower radiator hose outlet, $50.
Fan pulley and mount, $100.
USED throttle cable, $20 or a NEW one with the rod end kit for $50.


These are all SHIPPED prices!

Mark.
 
Also Im looking for the p pump mount bracket that mounts on the side of the block
 
Also need the whole throttle linkage setup that bolts to the side of the p pump, linkage, springs, mount and all
 
bump

Im also looking for a stock 24v intake horn and 12v intake manifold.

Also still looking for a dipstick, fan pulley and mount and the injector return banjo bolts
 
Bump, still looking for dipstick and the push in to the block part of the dipstick tube, fan pulley and mount for pulley, banjo bolts for returns on injectors, also oil fill neck for timing cover
 
You must log in or register to reply here.
Back
Top