JasonCzerak
New member
- Joined
- Aug 10, 2006
- Messages
- 14,822
So, I managed to get Levi to design and make me the first OEM manifold blanket. And to top it off, requested two holes to be stitched closed to prevent fraying for the EGT and Drive pressure ports.
So far, folks will have to figure out how they'll move the heater core return line. Disconnecting the hoses and having coolant everywhere will be an issue unless Levi makes a "cut" to work around this..
However, Fits like a glove!
I did suggest he clean up the edges a little. maybe some over lap and re-stitching. And to make it an even cleaner look and away to attach the blanket to the head studs if you have them, so we can close the gab a little.
See attached pics!
So far, folks will have to figure out how they'll move the heater core return line. Disconnecting the hoses and having coolant everywhere will be an issue unless Levi makes a "cut" to work around this..
However, Fits like a glove!
I did suggest he clean up the edges a little. maybe some over lap and re-stitching. And to make it an even cleaner look and away to attach the blanket to the head studs if you have them, so we can close the gab a little.
See attached pics!