9 LIVES
Demolition Expert
- Joined
- Oct 29, 2006
- Messages
- 4,051
Tired of messing with my TPS. I want to put lockup and over drive on switches. 15 years ago I did this to one of my trucks....can't remember how to do it.
I prefer to splice into the plugs wires at the tyranny. I know the wire closest to the front of the truck is OD and the rear plug is LU with the center being power. Do I just run wires off of those inner and outer wires to the switches? Do I need to leave the power wire alone or does that get run to the switches as well? Do the switches need power at all? If I can remember correctly, your only grounding the wires with the switches so no power was needed at all right?
I prefer to splice into the plugs wires at the tyranny. I know the wire closest to the front of the truck is OD and the rear plug is LU with the center being power. Do I just run wires off of those inner and outer wires to the switches? Do I need to leave the power wire alone or does that get run to the switches as well? Do the switches need power at all? If I can remember correctly, your only grounding the wires with the switches so no power was needed at all right?