Recent content by BlackSkyRacing

Search didn't produce much, planned to call Profab Monday if they aren't at the pull tonight (they're local to me). Been playing in stock driveline truck pulling for a little bit now with my customer's rigs. Plan to put a truck together from scratch and since I'll end up in the open classes here...

Planning to drop the front on my truck at least 2" and I'm just wondering if there's an adjustable track bar out for helping keep the front axle centered?

JL machine did these for a customer last spring. He made two hooks before grenading the stock trans. I changed them out for 5x.016s to better match his turbo when he brought the truck in for the trans build among other things. He ran out of coin and now I have a set of injectors I need gone... I...

Ok, what searching I have done seems to come up with a max street drag radial diameter of 28 inches... While that should work with 3.42s (running a corporate 14 bolt) and 5k governor springs, I'd still like closer to 31 inch diameter. Anybody come across such an animal, or have a suggestion for...

Getting ready to install a 44mm gate around the secondary on a customer's set of compounds and can't seem to find a source for high pressure flex unions to weld inbetween the gate and the hotpipe. This truck tows heavy for farm use and sees prolonged heat and rough roads, so I feel like solid...

Alright, I'll admit I know Dodge 4 speed transmissions like the back of my hand, and I have been through a handful of these 4R100s with decent lucl thus far. But, I have one that is kicking my ass. After chasing my tail it still has weak reverse, all forward gears shift firm, third is solid...

Trying to clean up the shop, prices aren't set in stone. Complete 24 Valve head, previous owner had it resurfaced for a HG job just before the turbo scattered. Will need new valves and a valve job. - $300 (Also have rockers and pushrods if needed) Complete 12 valve head, at machine shop now...

Just had a core come in with a billet converter, nothing special, appears to be the sonnax cover. But the unit is dark grey in color with a medium metallic flake. Just trying to figure out who to call with the numbers on the converter for more info. The rest of the trans looks like it was...

I am looking into deletes for a few customers (off-road) trucks and I see my supplier only has Sinister Mfg kits for the 07-09 trucks available. Just want to be sure that this kit will still work, or can be modified to work.

$500 Shipped to anywhere in the lower 48. Spare block that has been sitting in the corner of the shop for too long. Thought I had a couple projects lined up for it, but with moving and all it never happened. Would come with an unground good straight crank, might throw in a set of balanced and...

Since the search function hates numbers... I recall Chris Werner was tossing around the idea of swapping a Dana 44 into the front of his truck for the strip. I was just curious to see what ever became of that or if anyone thinks I'm crazy for wanting to try. I'm about to pick up a RCSB 1500 4x4...

Just had one come in for a rebuild recently and I'm undecided as to whether or not I should eat the core charge and keep this sucker... My truck is about to get short boxed and set up more as a drag oriented truck than a full DD :poke:

$1750 OBO plus the ride. The 351 has in cab adjustability and is being run off of drive pressure. If your normal driving doesn't take you through extreme elevation changes it could be switched to running off of boost so you don't have to deal with the extra copper line and whatnot for cooling...

I have a customer who is a hotshot hauler. His pump crapped out on him while on the road and he replaced it with a Scheid Reman unit. He simply finished his haul, and drove the truck to my shop for a P-Pump swap (around 750 miles or less). Truck is an '01 with the NV5600, and it is BONE STOCK...

Can we expect to see see the Smokin Monster at TS or other similar events? Any changes to the truck been made lately? My interest in monster trucks has been renewed by a fresh injection of Monster Jam last night after a nearly 20 year break LOL Half tempted to find a chassis to play around with...