Recent content by RonA

Grizzly G0827 Vertical/Horizontal Mill. 2019 model, un-used. Geared head, large table, 3 axis DRO, 2 axis power feed. $6500.

Mostly hard cast. .357, .44, and .45. Not sure how many, but guess 25-35 pounds worth. Bullets only, no ammo.

Once fired, mostly Hornady. Several hundred cases. Just pay the shipping and they are yours.

I have a pair of these left over from my car project. Like new(around 120 miles). Paid 160 each but will take $100 ea. RonA

Left over parts from my car trans swap project. .700, and .750. Might be good for a rock crawler or hot rod project. Have 3 total, at least 2 are Wilwood brand. Installed and bled but never run. RonA

I have an electric wheelchair and scooter to donate if anyone is looking. Wheelchair is a Sunrise Medical Pulse 6. Several tears old but was used by my dad to go from his room to the dining room. Pretty good shape, not a $20k chair but not a cheapo either(around $5500 new). Scooter needs a new...

Friend has some of these, all new. 2 1/2" to 4" sizes. model 375ADA and others. I guess they are used to keep water in a building from back flowing into city water when city water is turned off or loses pressure .I can take pictures by request.

Picked up a 3/4 scale Jet J head milling machine and old South bend lathe yesterday. Don't need them but hate to see usable iron go to waste. I'll clean them up and see if I can find a use for them.

Brand new, never plugged in. Includes all the normal stuff(gun, regulator, ground lead, etc.) $2500 RonA

Is it as easy to convert a DT466E to P7100 as it is to do a p-pump conversion on a 24V Cummins?

Any ideas what kind of life span these Cummins/Onan 4bt powered generators have? 5k hours, 10K? Is Perkins or JD any better?

I made a batch of these for F1 diesel 10-12 years ago in exchange for his fancy camshaft. Turned out very nice unlike the piece of **** cam that started flaking and had to be replaced in less than 500 miles. $5 and shipping to get it out of my sight. Very nice looking part, even if it's just a...

I'm thinking about selling my my little tractor and buying larger one. It's a 2004 JD 310SG with around 4400 hours. Well maintained, no leaks, good tires. My question is how often should a limited use piece of equipment be fired up and ran to keep it up in good shape? I always fire up my little...

Found a pretty good deal on a small foot print 500W laser Everything I cut is small(2" diameter or less, 14ga to 22ga stainless) so the small table will be fine for me. I'm not finding much info about how much gas they use(Nitrogen). If they use a lot, I may look into buying liquid Nitrogen...

My skidding attachment arrived today with the box all broken and taped up. Had an extra piece that must have came from someone else's broken box. Tenneco 83910 bushing. Some kind of torque bushing for large trucks. New but been rolling around.